HA Italia S.p.A. - Divisione Mazzon
Since 1962 Mazzon has been a reliable partner in more than 30 countries as for no-bake systems (furanic, phenolic, alkyd and polyurethane), cold-box and hot-box binders, insulating refractory coatings in alcohol and water, additives, glues, releasing agents and many other chemicals.
Mazzon has been operating since 1997 with a certified quality system based on UNI EN ISO 9001:2015 rules. In 2012 our safety system was certified according to OHSAS 18001:2007 rules and in 2015 the company implemented ISO 14001 environmental certification.
Mazzon has recently been equipped with brand new chemical reactors: the company is now able to produce higher quality resins at competitive prices in shorter times. Continuous improvement of plants and equipment, such as our huge investment for the reactor, are constantly planned in order to cope with a competitive and demanding global market.
The CLP Regulation (EC) n. 1272/2008 entered into force affecting foundry binders too. Mazzon is already facing this change since we can already supply Cold Box resins (Leganol HD and HI series) and No Bake resins (Ecofur 6000 series) with a low formaldehyde content: < 0,1%, which means they are exempt from labelling rules, and a free furfuryl alcohol content < 40%, which is to be considered as not toxic
MANUFACTURING PROGRAM:
CHEMICALS FOR FOUNDRIES for iron - steel - non ferrous castings
BINDERS FOR CORES & MOULDS
RESINS for COLD BOX process curing with amines
FURAN RESINS
FURAN-PHENOLIC and PHENOLIC RESINS
ACID HARDENERS
ALKALINE PHENOLIC RESINS curing with esters / methylformiate / CO2
PHENOLIC-URETHANE BINDERS
POLYOL-URETHANE BINDERS
ALKYD-URETHANE BINDERS
SODIUM-SILICATE based binders curing with CO2 / esters
REFRACTORY COATINGS
ALCOHOL and WATER BASED COATINGS for cores and moulds
COATINGS for cores in automotive industry
COATINGS for polystyrene patterns (full mould and lost foam process)
COATINGS for cylinders / rolls centrifugal castings
AUXILIARIES
ALCOHOLIC THINNERS for refractory coatings
GLUES and FILLERS
MOULD SEALS - 4,5 mm to 20 mm
RELEASE AGENTS
EXOTHERMIC POWDERS
ANTIVEINING ADDITIVES
STRENGTHENING PRIMERS
SCREW CLEANERS
PAINTS for wooden patterns
